Hapstone optimal (Silicon Carbide Stones 5 pcs)
Product details
- Unit: piece
- Delivery time: 1-2 tööpäeva
- free.transport.product.page
65,00 €
Silicone carbide stones are designed to sharpen the hardest steels (up to HRC 65). The set includes 5 stones: 120, 240, 600, 1000 and 2500 grit (JIS).
Suitable for e.g. carbon steels and hard steels, e.g.: ZDP-189, ZDP-247, S30V, S35VN, S90V, S110V, 154CM, D2, YXR7, Cowry, S290, S390, K294, K390, M390, Elmax, 154CPM, ATS-34, 440C, AUS-8, AUS-10, A2, BG-42.. For knives made of softer steel, silicone carbide stones are not suitable, because soft steel increases the wear of stones. However, coarser stones with a roughness of 120 and 240 can also be used to make liming on other steels, as their cohesive substance is stronger and more durable. The stones are 6 mm thick and fixed on aluminum plates.
Hapstone Silicon Carbide stones are pre-leveled and do not require additional processing before being put into operation.
It is recommended to use with a lubricant or water. Soak the stone in water for a few minutes before use. In the process of sharpening, water can also be additionally sprinkled on the abrasive.
Suitable for e.g. carbon steels and hard steels, e.g.: ZDP-189, ZDP-247, S30V, S35VN, S90V, S110V, 154CM, D2, YXR7, Cowry, S290, S390, K294, K390, M390, Elmax, 154CPM, ATS-34, 440C, AUS-8, AUS-10, A2, BG-42.. For knives made of softer steel, silicone carbide stones are not suitable, because soft steel increases the wear of stones. However, coarser stones with a roughness of 120 and 240 can also be used to make liming on other steels, as their cohesive substance is stronger and more durable. The stones are 6 mm thick and fixed on aluminum plates.
Hapstone Silicon Carbide stones are pre-leveled and do not require additional processing before being put into operation.
It is recommended to use with a lubricant or water. Soak the stone in water for a few minutes before use. In the process of sharpening, water can also be additionally sprinkled on the abrasive.