HAPSTONE Premium CBN #1000 terituskivi mustal alusel
Toote info
- Ühik: tk
- Tarneaeg: 1-2 tööpäeva
- Tasuta tarne!
80,00 €
Hapstone Premium CBN terituskivid on parima kvaliteediklassi ja kulumiskindlusega ning ülikiirelt lõikavad abrasiivid, mis eriti sobilikud kaasaegsetele superterastele (nt pulberterased jne). Hapstone Premium CBN abrasiivi mõõtmeteks on 152x25mm ja paksus 3mm.
CBN (cubic boron nitride) on sünteetiline kristalliline materjal, mis jääb oma kõvadusomadustelt alla vaid teemantile. Ka struktuuriliselt on CBN sarnane teemantiga. Abrasiivikiht on ühtlaselt ja tihedalt kaetud CBN osakestega, mistõttu kivi teritab väga kiirelt ja agressiivselt.
Abrasiivide refentstabel:
Extra coarse: 120 JIS = F120 = 110 mikronit
Coarse: 240 JIS = F220 = 60 mikronit
Medium Coarse: F400 JIS = 320 = 30 mikronit
Medium: 800 JIS = F500 = 20 mikronit
Medium Fine: 1000 JIS = F550 = 12 mikronit
Fine: 1200 JIS = F600 = 10 mikronit
Extra Fine: 2000 JIS = F800 = 6 mikronit
Ultra fine: 4000 JIS = F1200 = 3 mikronit
Near-mirror: 8000 JIS = F2000 = 1.2 mikronit
Mirror: 16000 JIS =F4000 = 0.7 mikronit
These stones are made from CBN powder (cubic boron nitride). Hapstone Premium CBN uses a metal-organic bond, which is close to metal in terms of its wear resistance, but the bar on this bond works softer. Hapstone Premium CBN is ideal for both modern "super steels" and for the sharpening of ceramic knives. The stones are mounted on a blank (powder-coated) of high quality aircraft-grade aluminum.
Benefits of sharpening knives with Hapstone Premium CBN stones:
· Comfort in work — the stone is hard enough but comfortable in work. It is often compared to Japanese water stones, but Hapstone Premium CBN is ten times more durable than them.
· Unpretentiousness — stones for knives made of boron nitride do not require additional care, which cannot be said about natural and synthetic stones for sharpening of knives. These bars do not require the application of cutting fluids (coolants).
· Delicate processing — CBN grains work softer and more productively, while not leaving unwanted scratches on the cutting-edge during the sharpening of a knife. This is due to the fact that CBN has an octahedron-shaped crystal structure — it has more cutting edges, but corners are less sharp, which gives a good mirror result.
· Versatility — the presence of bars of different grain sizes, but of the same size (150x24x5mm, the thickness of the working layer – 3 mm) allows to change the stones depending on the stage of processing without changing the angle of knife sharpening:
· High performance of CBN for knife sharpening — an excellent result is achieved due to the concentration of 100% CBN grain of CBN1 type.
For finishing, we recommend to use Gunny Juice diamond suspension.
CBN (cubic boron nitride) on sünteetiline kristalliline materjal, mis jääb oma kõvadusomadustelt alla vaid teemantile. Ka struktuuriliselt on CBN sarnane teemantiga. Abrasiivikiht on ühtlaselt ja tihedalt kaetud CBN osakestega, mistõttu kivi teritab väga kiirelt ja agressiivselt.
Abrasiivide refentstabel:
Extra coarse: 120 JIS = F120 = 110 mikronit
Coarse: 240 JIS = F220 = 60 mikronit
Medium Coarse: F400 JIS = 320 = 30 mikronit
Medium: 800 JIS = F500 = 20 mikronit
Medium Fine: 1000 JIS = F550 = 12 mikronit
Fine: 1200 JIS = F600 = 10 mikronit
Extra Fine: 2000 JIS = F800 = 6 mikronit
Ultra fine: 4000 JIS = F1200 = 3 mikronit
Near-mirror: 8000 JIS = F2000 = 1.2 mikronit
Mirror: 16000 JIS =F4000 = 0.7 mikronit
These stones are made from CBN powder (cubic boron nitride). Hapstone Premium CBN uses a metal-organic bond, which is close to metal in terms of its wear resistance, but the bar on this bond works softer. Hapstone Premium CBN is ideal for both modern "super steels" and for the sharpening of ceramic knives. The stones are mounted on a blank (powder-coated) of high quality aircraft-grade aluminum.
Benefits of sharpening knives with Hapstone Premium CBN stones:
· Comfort in work — the stone is hard enough but comfortable in work. It is often compared to Japanese water stones, but Hapstone Premium CBN is ten times more durable than them.
· Unpretentiousness — stones for knives made of boron nitride do not require additional care, which cannot be said about natural and synthetic stones for sharpening of knives. These bars do not require the application of cutting fluids (coolants).
· Delicate processing — CBN grains work softer and more productively, while not leaving unwanted scratches on the cutting-edge during the sharpening of a knife. This is due to the fact that CBN has an octahedron-shaped crystal structure — it has more cutting edges, but corners are less sharp, which gives a good mirror result.
· Versatility — the presence of bars of different grain sizes, but of the same size (150x24x5mm, the thickness of the working layer – 3 mm) allows to change the stones depending on the stage of processing without changing the angle of knife sharpening:
· High performance of CBN for knife sharpening — an excellent result is achieved due to the concentration of 100% CBN grain of CBN1 type.
For finishing, we recommend to use Gunny Juice diamond suspension.